Calibration Commissioning and Consulting

With a full range of services, FCX is a one-stop provider for your calibration needs. We apply our industry expertise and in-depth knowledge, and we’re ISO/IEC 170:2005 accredited to provide you with high quality, reasonably priced calibrations for your test equipment. Our services are also supported by our commitment to excellent customer service.

To ensure we’re consistently providing quality calibration services, we’ve made the extra effort to be accredited by independent authority under ISO standards and adhere to the following regulations:

• ISO/IEC 17025:2005 accredited
• ISO 9000
• AMS 2750 D
• Traceable to NIST

At FCX, we are accredited for the following calibrations and continue to expand our expertise:

• DC and AC voltage
• Current
• Resistance
• Thermocouple
• Pressure
• Vacuum
• And more

In-house and on-site calibration solutions including:

• Laboratory instrumentation
• Process equipment
• Metrology lab services
• Pipette services
• Thermal mapping
• Commissioning and qualification
• Consulting services
• Asset management

FCX provides expert calibration for all temperature standards and instruments, with experience in equipment including: 

• Environmental chambers
• Freezers
• Ovens
• Water baths
• Lab equipment
• Aerospace
• Commercial and captive heat treating
• Plastics
• Rubber
• Extrusion
• Blowing molding
• Injection
• Casting, forging, and foundry operations

On-site calibrations can be performed several ways, depending on whether or not your process is running and if the test probes can be placed adjacent to your temperature sensors. These tests are referred to as: 

System Accuracy Tests

Performed by placing a certified test sensor as close to the sensor tip as is practical, then comparing the reading from the test sensor to the reading of the system. 

Comparison Tests

If the sensor to be tested is not accessible with your process running, the accuracy of your instrument reading can be determined by connecting a test instrument to the sensor and comparing the two readings. 

Multi-Point Calibration Tests

If your process is not running, the instrument can be calibrated at multiple points throughout the operating temperature range per your specification.